Antimicrobial Interior Material
The DT-X interior is made with an odor-reducing and dirt-resisting antimicrobial material, that helps keep ph levels balanced, helping the helmet stay fresher longer inbetween cleanings.
5mm Peel Away Temple Pads
External temple pads are desgined to be removed, if you find just a little too much pressure on your temples. Subtle fine tuning like this can make all the difference in even just a short ride.
5mm Peel-Away cheek pad
The ear pockets have molded recesses for easier intercom speaker installation.
VAS Shield System
Shield mounting utilizes the Variable Axis System (VAS) pivot mechanism. The VAS pivot cover is smaller and lower than the previous design, yielding an average 24mm more area above the cover. As a result the shell is now smoother in the temple area, increasing the helmet’s ability to glance off objects during an impact.
Featuring the PB-cLc (Peripheral Belt - complex Laminate construction) derived from Arai´s exclusive F-1 helmet technology, made from the layering of various proprietary materials, bonded with specially-developed resins.
The upper edge of the eye port is reinforced with the Peripheral Belt, woven in house using proprietary Super Fibers, to increase strength and help redirect impact energy laterally.
New "Z" Resin
In shell creation, resin serves to bind material to material. Arai has long developed exclusive resins to create stronger and lighter shells, and has recently developed a new ‘Z Mixture’ resin. It increases the adhesion ability and strengthens the shell with less resin used, allowing for further weight reduction of the helmet.
Dual Flow Ventilation System
The upper front vent is Arai´s newest design, incorporating both an intake and exhaust port, creating a “dual flow” effect and is therefore aptly named the Dual Flow Duct. Air enters the front intake of the duct and draws out hot exhaust air from the rear. Toward the back, the newly styled rear Duct Flow Spoiler also incorporates a dual flow system for great airflow. The center duct hole takes in air and uses the low pressure from the left and right duct slots to draw out hot air. This new ventilation system works well in many riding positions, allowing the front and rear vents to let cool air enter from the front regardless of the rider´s head angle.
Keeping with the Round & Smooth egg-shaped form, the Hyper Ridge, along the lower edge of the shell increases shell strength & protection around the bottom opening - managing energy migration laterally. And the new side exhaust vents, sculpted into the Hyper Ridge design, result in a more efficient and smoother airflow. The DT-X utilizes Arai´s proprietary multi-density one-piece EPS liner, specifically tuned to each area of the helmet, to maximize performance. Shell shape & strength, combined with the tuned EPS liner, minimizes helmet size & weight - improving rider comfort.
*VAS Pro Shade System shield. With three positions: down, mid and up. While down the Pro Shade blocks the majority of sunlight. In the Mid and Up position the Pro Shade acts like a peak or brim of a hat. *Pinlock anti-fog lens for all weather touring. *ES Chin Curtain redirects airflow under the cheek pads creating negative air pressure, reducing the buildup of breath inside the helmet. It also decreases wind noise by reducing air turbulance under the chin.
*optional not included